Home Shop Contact Us
Sterling Power Products logo
Products
Alternators
Alternator Regulators
Alternator to Battery Chargers
Alternator Splitting Systems
Battery Chargers & Maintainers
Portable Global Smart Charger
ProBudget
ProCharge
ProCharge Ultra
International
ProDigital
ProNautic
Auxiliary Battery Charger /
Maintainer
Battery Balancer
Battery Charging Link
Connectors
Battery Desulphation Unit
Battery to Battery Chargers
Crossover Switch
Galvanic Isolators /
Fail Safe Zinc Savers
Gold Plated Accessories
High Powered Distribution Box
Inverters
Inverter-Charger Combis
Isolator Switch
Pneumatic Tank Gauge
Power Management Panel
Solar Regulators
Split Charge Diodes
System Diagnostics
Waterproof Battery Chargers
Waterproof Battery to Battery Charger
Wildside
High Resolution Photos
Where to Buy
Downloads
Datasheets
Support
About Sterling Power Products
Press & News
Sterling Power USA
Sitemap

Portable Global Smart Charger

Portable Global Smart Charger

Features auto repair program

The new micro processor controlled small portable charger can now be used anywhere in the world. It not only gives you all the latest pulse charging and built in de-sulphation but is also truly global, with 100-230 volt 50/60 hz ac input, putting the product in a class of its own.

Features and benefits of this portable charger

  • Universal AC Input (100V to 240V): can be used anywhere in the world, truly global charging.
  • Suitable for all types of lead acid batteries: Wet, GEL, AGM, Calcium
  • Simple 3 touch screen selections with intuitive iconic LED indications: simple to use.
  • 3 charge modes, small battery, large battery and Cold Charge, ideal for low temperature battery charging, of de-sulphation, and also for the new Calcium where a higher voltages is required to charge the batteries.
  • Microprocessor Control multi-stage charger with Pulse Absorption and Float Charge: fast charge but safe floating for long term operation.
  • Checks if a battery is faulty, the processor can automatically identify if a battery is beyond repair and flash a warning light to inform you if it needs replacing.
  • Repairs faulty batteries (if recoverable) if the battery is found to be faulty but repairable the unit will automatically identify the fault and inject high voltage short DC pulses until the battery is repaired, an l.e.d. shows the charger is on repair mode.
  • Defective battery identification. If after 8 hrs on the repair mode the battery is deemed not to be repairable then an l.e.d. will flash to inform you that the battery is beyond help and needs replacing.
  • Three charge modes, when the battery is found to be suitable for a charge then the charger will bulk charge, then pulse width absorption charge and finally float charge, the unit can be left on permanently.
  • Soft start charging: if the battery is found to be heavily depleted then the smart charger will start at a low pulse current until the battery has reached a level where it can then absorb the full charge power.
  • 50% power reduction mode: for small batteries under 30 amp hrs.
  • Cold weather 14.8v ( x 2 for 24 v ) charge mode option.
  • Two interchangeable connection leads with clamps and eyelet terminals.
  • Thermal control, regulates charge current in hot conditions.
  • No connection spark, there is no output voltage until the battery is connected.
  • Electronic reverse polarity protection with LED warning.
  • 40 hrs time out to avoid any possible problems
  • Short circuit protected.
  • Thermal protection, reduces power and switches off if too hot.

Specification

  • a/c input range 100-240 v
  • a/c frequency 47-64 hz
  • Full load 1.3 amps@230 v a/c
  • Max power 70 watts
  • Optional Efficiency >81%
  • Max d/c current 5 amps
  • Charge voltage for sealed battery 14.4v x 2 for 24v
  • Low temp/calcuim mode 14.7 x 2 for 24 v
  • Float mode high level 13.5v x 2 for 24 v
  • Float mode low level 12.8v x 2 for 24 v
  • Ripple 200mv
  • Protection: overload, short circuit, over temperature, reverse polarity, no spark, short circuit, 40 amp time out.
  • Construction Pol-carbonate casting, water resistant
  • Approvals EN 60335, EN55014, IP45 body only
  • Weight 0.4 kg
  • Dimensions 150x60x30 mm
Plug type Voltage a/c Voltage d/c Amps Weight Part nos
British 110-230 12 5 0.4 GS125B
Euro 110-230 12 5 0.4 GS125E
USA 110-230 12 5 0.4 GS125A
British 110-230 24 2.5 0.4 GS243B
Euro 110-230 24 2.5 0.4 GS243E
USA 110-230 24 2.5 0.4 GS243A

Ordering information

top
Content © Sterling Power. Disclaimer. Privacy Policy. Website designed by QCWebsites Ltd